Products
Your current location: Home > Products > Network Intercom System
- Introduction
- Type
- Features
- Parameter
- Case
After HT-IAAI intelligent audio analysis processor built-in intelligent audio analysis CPU, live sound picked up by an external monitor head or network intercom control panel intelligent analysis and processing by the CPU determines whether the alarm information through the hardware interface. Alarm output can be connected to the control panel, alarm, intercom network, hard disk recorders and other security equipment.
HT-IAAI intelligent audio analysis processor (rear)
● External microphone input or network intercom control panel picks up sound
● Built-in intelligent audio analysis CPU, automated analysis and processing site picks up sound, linkage alarm output
● Set up a connection: Serial Direct Connect, the service terminal adapter or CKNU module adapter set of connectivity options
● switch alarm output interface connecting an alarm device, normally open, normally closed, sound intensity signal output, screaming signal output software settings
● high, low trigger enable audio detection function selection
● After setting the trigger delay lifting
● scream, the sound intensity trigger binding selection set
● sensitivity, sound intensity, pitch, time base matches Select Settings
● The current environment of maximum intensity of the test, the display
● DC12V output provides power for an external microphone
No. | Project | The main technical parameters |
1 | Pickup | An external microphone input interface, the connection distance ≤50M≤50M |
2 | Control Panel | Standard RJ45 interface control panel, capture audio signals |
3 | Setting connection | Serial Direct Connect network service terminal adapter or network module adapter CKNU |
4 | Alarm Output | 2 switch alarm output, normally open / normally closed software settings, ≥500mA |
5 | Alarm Input | 2 alarm outputs, normally open / normally closed software settings, ≥500mA |
6 | Signal to noise ratio | ≥50dB |
7 | Frequency response | 50Hz-14KHz,-32dB |
8 | Sensitivity | ≥700mV/Pa |
9 | Sound intensity range | 50-130 dB |
10 | Power Output | DC12V provide MIC monitor head power |
11 | Rated voltage | DC12V,power consumption: ≤30W |
12 | Product Size | 211×155×45mm |
13 | Working temperature | -10℃~60℃ |
14 | Working humidity | 10%~90% |